Geeetech® 3D Printer Motherboard GT2560 + A4988 Driver + LCD2004 Kit

: In stock

: Addictronics

$64.42 Regular price $77.46

Introduction:GT2560 is a compact board that is integrated with the mighty function of the Arduino Mega2560 + Ultimaker.The GT2560 can not only take full place the Arduino Mega2560...



Have a Question?

Be the first to ask a question about this.

Ask a Question
Introduction:GT2560 is a compact board that is integrated with the mighty function of the Arduino Mega2560 + Ultimaker.The GT2560 can not only take full place the Arduino Mega2560 + Ultimaker on respect of both software and hardware, but has more premium features: the streamlined interfaces effectively avoid the unnecessary troubles, well-regulated compaction of components highly integrated saves more space and easier to be mounted on most applications.5 stepper motors, swappable driving modules, mighty ATmega2560 processor with 256k memory, 16MHz operating frequency, high-performance USB serial converter FT232RQ, all these make the GT2560 an ideal option for a 3D printer control board. What's more, GT2560 can run over 12V and output 90W to a MOSFET, which gives higher torque and higher rotation rate.Features:1. Integrated with the mighty function of the Arduino Mega2560 + Ultimaker and the Mega2560+ramps 1.4 kit , GT2560 can not only take full place them on respect of both software and hardware, but also features compact size, more convenient connection, and more stable.2. Adopt ATmega2560 as the main control chip, coupled with the high-performance USB serial converter FT232RQ.  3. The power pack: operating voltage is 12V-24V, double power supply design feeds for heatbed and logical part separately. The current is 12A for heatbed and 5A for other parts. The cooling fan can support 12V4. The main circuit adopts SMD fuse tube, the diode added to the power port can provide reverse protection to the whole circuit, in addition, the 5V USB is USB port protected with 500mA Recoverable fuse.5. Three 12v fan output and one PWM output for LED or other lighting equipment.6. Three 55Amp MOSFET (with LED indicator, the actual output is restricted by the PCB board and the connector), all 3 MOSFET are equipped with heat sink to ensure sufficient heat dissipation and stable operation.7. Support 5 A4988 stepper drivers (3 for X/Y/Z axis, and 2 for extruders); the subdivision of stepper motor can be setup by dial switch, eliminating jumper caps, easier to operate.8. Three temperature sensor input (100k thermistor is recommended)9. Extended LCD and SD card interface support both LCD2004 and LCD 12864, with which you can print without your PC.10. The firmware is the prevalent Marlin, which is known for its stability, usability, and high-performance.The specifications of Pin connectors:Motor: XH (2.54mm-4pin)Fan: PH (2.00mm-3pin)Endstop and thermistor: XH (2.54mm-2pin)Hardware resources:12V 12A and 12V 5A power supplyOne power port for heatbed and 2 for extruderFive stepper motor input, (3 for X / Y / Z axis, and 2 for extruders)Extended LCD & SD card interfaceSix endstop input (X-MIN, Y-MIN, Z-MIN X-MAX, Y-MAX, Z-MAX)Three input for thermistor (TEMP1, TEMP2 and TEMP3)Three input for 12V cooling fanOne PWM outputDimension: 107.3 x 78.7 x 22mmWeight: 80 gSoftware Resources:Compiling environment: Arduino IDEFirmware: MarlinHost software: printrun, Repetier-HostUsers Manual of GT2560: Package included:1 x GT2560 Board5 x A4988 stepper motor driver5 x Heat sink2 x Sticker1 x LCD2004 control board2 x Control board cable1 x USB cable

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.


We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.